instrument ground school completed!

I finished instrument ground school today with a final test. I scored a 93. I can't seem to make the perfect 100, but I'm happy with the results. I'm not done studying yet though, on Friday I take my FAA written exam. That's the one that really counts.

I have taken a few practice tests, which are in the same format, and consist of the same questions. On average I was scoring 80%+ so I'm not too worried. I would like to do better than 80'ish, but I only need 70% to pass. 🙂

Tomorrow I'm going to enjoy a well deserved day off. At least for the first half. Then it's back to studying for the test.

I only have a few flights left in step three. This step consists of time in the Seminole for my Private Pilot Multi-Engine rating. It's weird, because I'm almost done, and I only have 10 hours in the airplane. In a few flights I'll be expected to complete all the objectives to test standards.

I've been doing ok with the flying, but there is a lot of information to memorize. I've been having some troubles with that. Hopefully now that I'm done with instrument, I can start studying Seminole procedures and systems again.

It never ends my friends. Once you finish studying for one thing, another comes along. I have to keep studying it all too, because I can't forget any of it!

instrument ground school: update

This is the last week of ground school, and I took my second quiz in the class today. I scored a 97 today, and last week I scored a 94.

The final in the class is this week, and then the FAA exam is on Friday.

I was initially a little concerned with the proximity of the FAA exam to the end of class. I am feeling a little more confident with it now. I took a few practice exams, and did ok. Nothing worth bragging about, but I think with this week to study, I should do fine.

This class has moved incredibly fast, and I'm amazed at the information I have absorbed in such a short amount of time. I'm excited to be done with ground school, and get back to flying some more. I haven't been able to fly as much due to class, as well as weather delays.

In fact- right now it's pouring rain, and thunderstorms 🙁

instrument ground school

Today I started instrument ground school. This ground school is two and a half weeks long. It is in preparation for my FAA written exam for Instrument airplane, and Instrument Instructor.

Today we went over some of the basics, and got familiar with our books. Introduced to some of the charts, and approach systems we will use in IFR conditions. There is a lot of information to cover, and little time to speak about everything.

Because of the cut backs at the school, they now schedule each ground school only once per month. Previously it was twice per month. This means, even though I haven't finished my multi-engine add-on, I have to start instrument ground school. Otherwise I would finish multi-engine, and be stuck with nothing to work on for a few weeks.

This brings on a little bit of a challenge, as it will require a lot of studying for both. The next few weeks are going to be very busy for me.

seaplane training: day 2

It took me a little while longer than I thought to get the motivation to write this.

The day after my first post, I went back to finish the course. Another 2 hours of dual with an instructor, and I was signed up for the checkride. I nervously studied over the ground school course hand out. Even though this simple add-on was going to be very straight forward, us pilots are scared of two things: wings leaving the airframe, and check airmen.

I chuckled to myself, as to being nervous over such a timid checkride. After a few internal pep talks, I was fine. We headed out to the plane, and got set to go. I climbed in, and the check airman pushed us off the shore.

First off, we sailed. Using control surfaces you can actually sail the seaplane in a certain direction. We then started up the airplane. This involves grabbing ahold of the prop, and yanking it to start. He climbed in, and we were off. Started off with some idle power taxi techniques. We then did a step taxi, and step turn. Right after that we were off in the air, and headed for another lake.

As I leveled off at flight level 500 feet, I brought the power back to cruise power. He grabbed the throttle and yanked it to idle, "Engine failure, where we going". Looking around, I stumbled for a second. This lake, or that one. "Where we going?!" I pushed the nose over, and banked to the obvious choice. "That was the only logical choice, took you long enough". Great way to start it, I thought. No worries, the landing was beautiful.

We set up for docking. This would be the first time I actually tried this maneuver with a dock. Before we just 'imagined' a dock, and practiced lining up with it. Good thing I'm an amazing pilot, because I had no trouble. (sarcasm)

After this we did some plow taxi, and turns, and then a crosswind take off. We came back and did a rough water landing. Glassy water take off, and glass water landing. Rough water take off, and headed back to the office.

In a quick .8 I had passed the checkride. After some short paperwork, I had a new certificate that now said 'Airplane single engine land and sea'.

seaplane training: day 1

Today I took the adventerous trip to Winter Haven Florida. About a two hour drive from Vero beach, Winter Haven is located in central Florida. Located right next to the Winter Haven airfield, is Jack Brown's Seaplane Base. Here they operate a small seaplane flight school. The claim to have trained the most seaplane pilots in the world.

Leaving early this morning, we arrived around 8:30 am. After filling out some paperwork, we started with some ground instruction. They provided us with a packet of general information about the airplane, and seaplane operations. After about an hour discussion, we headed out to the aircraft.

We were given a guided walk-around of the airplane. What to look for in pre flight inspections, and more information about the plane itself. Once we completed the pre flight inspections, we were ready to hit the skies.



We climbed in, and started to taxi out onto the middle of the lake. After getting the basics of taxi, and the different methods used, we lined up for take off. Take is fairly straightforward in the Cub. Full aft stick, untill you get up on the floats. You release a little of the pressure, but hold most, untill the plane climbs off the water. You don't really 'rotate', as much as, you let the plane fly by itself.

Once we got up to altitude, we started with some basic Private pilot maneuvers. Steep turns and stalls was all we attemted today. We then started in with some touch and goes.

Landing the seaplane is fairly simple. There aren't a lot of checklists to worry about, or power settings that are complicated. Everything about this airplane is very simple. The plane flies extrememly well, but requires a lot of attention to wind correction. Due to it being extremely light, it is affected heavily by wind.



It was fun to fly around low all day, and land on some different lakes.

Tomorrow we return again, early in the morning. Tomorrow we have another lesson to finish up on some more items. Then if all is well, we have the checkride. We're hoping the weather stays nice enough for us to finish tomorrow. I should have more pictures from today, as well as from tomorrow.

Untill then…